Skip to main content

Register of Functional Safety Engineers

Register of Functional Safety Engineers

Register of Functional Safety Engineers The following engineers have, through peer review, satisfied the requirements for the InstMC qualification ‘Registered Functional Safety Engineer’. These requirements include demonstration of competence & commitment:

  1.  Registration with the Engineering Council as CEng in demonstration of professional competence in accordance with UK-SPEC. This in turn is held to demonstrate underpinning knowledge and understanding (UK&U) and a commitment to Continuing Professional Development (CPD).
  2. Demonstration of at least an aggregate of 3 years’ diverse and direct experience in functional safety matters at a professional level.
  3. Demonstration of a comprehensive knowledge of related standards and good practice in functional safety.
  4. Demonstration of on-going (not prospective or historical), and competent engagement with functional safety matters at a professional level.
  5. Demonstration of Continuing Professional Development specific to functional safety

 

Surname Given Names EngC Reg No. RFSE Reg No.

 Date of Registration

Keyes Simon 607076 24/001 26/03/2024
Walton  Mark 561902 23/002 13/06/2023
Izzeldin Hussein Abdelaziz  695819 23/001 05/03/2023
Gowen Myles 693060 22/001 12/09/2022
Samuel George 676182 21/001 19/04/2021
Rafferty Ronald 441128 21/002 14/09/2021
Dolan Ian 661135 20/001 22/01/2020
Easton Colin 364463 19/001 24/06/2019
Wilkinson Nathan 656962 19/002 25/06/2019
Tack Jason 634361 19/004 02/12/2019
Holden Samuel John 620981 18/002 19/07/2018
O’Murchu Padraig 391846 17/001 10/01/2017
Blackmore Lawrence 312527 17/002 16/02/2017
Derbyshire Andrew 589348 17/003 17/02/2017
Southan Christopher 399831 17/004 31/08/2017
Wheeler Christopher 565789 17/005 21/09/2017
Reeve Paul 561859 17/007 20/12/2017
Green David 553776 16/002 18/05/2016
Dearden Harvey T. 331365 16/003 14/06/2016
Kriescher Steven 440028 16/006 21/12/2016